In this paper, a novel compact designs of rectangular shaped antenna are proposed. The proposed antenna consists of rectangular shaped patch of Lxp=11.86 mm by Lyp=9.06 mm. The antenna consists of four circled concave on four corners of rectangular patch. All simulation was done by using Rogers RT/duroid 5880 substrate material having dielectric constant ε_r= 2.2 and dielectric loss tangent tan δ =0.0009.The designs were analyzed by Finite Element Method (FEM) based HFSS™ Electromagnetic simulator software. Return loss, VSWR plot, smith chart and radiation pattern plots were observed and plotted for all designed antennas. The proposed antenna operates on X-Band (8-12 GHz) frequencies.
Inhaltsverzeichnis (Table of Contents)
- Introduction
- Antenna Design and Simulation Results
- Antenna Geometry 1
- Antenna Geometry 2
- Conclusion
- References
Zielsetzung und Themenschwerpunkte (Objectives and Key Themes)
This paper presents novel designs of compact, wideband, dual-frequency rectangular shaped antennas for X-Band applications. The primary objective of this research is to explore the design and simulation of such antennas, highlighting their performance characteristics and potential applications in modern wireless communication systems.
- Design and Simulation of Compact, Wideband, Dual-Frequency Antennas
- Analysis of Antenna Performance in X-Band Applications
- Comparison of Different Antenna Configurations
- Evaluation of Return Loss, VSWR, and Radiation Patterns
- Exploration of Applications for Modern Wireless Communication
Zusammenfassung der Kapitel (Chapter Summaries)
The paper begins by outlining the significance of wideband and multiband antennas in modern wireless communication. It then introduces the microstrip patch antenna as a popular choice for its robust design, compactness, and performance. The paper proceeds to present two antenna configurations designed for dual-frequency operation in the X-band. Both configurations are described in detail, and their simulation results are presented and analyzed. The analysis includes return loss, VSWR, radiation patterns, and surface current distribution. The chapter concludes with a discussion of the antenna parameters for each configuration at a specific frequency.
Schlüsselwörter (Keywords)
This research focuses on the design, simulation, and analysis of microstrip patch antennas for X-Band applications. The study utilizes Finite Element Method (FEM) based electromagnetic simulation software to explore various antenna configurations. Key terms include microstrip patch antenna (MSA), substrate permittivity, return loss, VSWR, and dual-frequency operation.
- Citation du texte
- Ankit Ponkia (Auteur), 2014, A Novel Compact Wideband Dual-Frequency Rectangular Shaped Antenna For X-Band Applications, Munich, GRIN Verlag, https://www.grin.com/document/283052
